Free shipping on orders over $75 within the contiguous United States.

Welcome to the New SBT Site! If you are already registered, please update your password by logging in.

Welcome to the New SBT site! Already registered? Please update your passwword by logging in.

Thank you for choosing SBT.

SBT

SBT Engine Rebuild Kit fits Yamaha 1.8L SVHO

SKU: 55-415E

In stock

Usually ships within 24 hours

$908.85

DESCRIPTION
FITMENT

DESCRIPTION

SBT Engine Rebuild Kit for Yamaha 1.8L SVHO Motors
Kit includes:
Internal Gasket Kit
4-Stroke Main Bearings
4-Stroke Rod Bearings
Timing Chain
Piston & Ring Sets (4) STD.

Please check fitment tab to confirm your year, make and model

FITMENT

Yamaha 2023 GP1800R SVHO
Yamaha 2023 FX Limited SVHO
Yamaha 2023 FX SVHO
Yamaha 2023 FX Cruiser SVHO
Yamaha 2022 GP1800R SVHO
Yamaha 2022 FX Limited SVHO
Yamaha 2022 FX SVHO
Yamaha 2022 FX Cruiser SVHO
Yamaha 2021 195 FSH Deluxe
Yamaha 2021 195 FSH Sport
Yamaha 2021 195S
Yamaha 2021 275E
Yamaha 2021 275SE
Yamaha 2021 275SD
Yamaha 2021 SX195
Yamaha 2021 AR195
Yamaha 2021 GP1800R SVHO
Yamaha 2021 FX Limited SVHO
Yamaha 2021 FX SVHO
Yamaha 2021 FX Cruiser SVHO
Yamaha 2020 195 FSH Deluxe
Yamaha 2020 195 FSH Sport
Yamaha 2020 195S
Yamaha 2020 275E
Yamaha 2020 275SE
Yamaha 2020 275SD
Yamaha 2020 SX195
Yamaha 2020 AR195
Yamaha 2020 GP1800R SVHO
Yamaha 2020 FX Limited SVHO
Yamaha 2020 FX SVHO
Yamaha 2020 FX Cruiser SVHO
Yamaha 2019 275E
Yamaha 2019 275SE
Yamaha 2019 275SD
Yamaha 2019 SX195
Yamaha 2019 AR195
Yamaha 2019 GP1800R
Yamaha 2019 FX Limited SVHO
Yamaha 2019 FX SVHO
Yamaha 2019 FX Cruiser SVHO
Yamaha 2018 SX195
Yamaha 2018 AR195
Yamaha 2018 GP1800
Yamaha 2018 FX Limited SVHO
Yamaha 2018 FX SVHO
Yamaha 2018 FX Cruiser SVHO
Yamaha 2017 SX195
Yamaha 2017 AR195
Yamaha 2017 GP1800S
Yamaha 2017 FX Limited SVHO
Yamaha 2017 FX SVHO
Yamaha 2017 FX Cruiser SVHO
Yamaha 2016 FZS
Yamaha 2016 FZR
Yamaha 2016 FX SVHO
Yamaha 2016 FX Cruiser SVHO
Yamaha 2015 FZS
Yamaha 2015 FZR
Yamaha 2015 FX SVHO
Yamaha 2015 FX Cruiser SVHO
Yamaha 2014 FZS
Yamaha 2014 FZR
Yamaha 2014 FX SVHO
Yamaha 2014 FX Cruiser SVHO

Installation of your new seat cover is easy and can be done by most do it yourselfers. Listed below are the tools and supplies you will need:

Staple Gun (preferably electric or air powered)
¼" Stainless Steel staples to fit your gun
Needle nose pliers
Flat blade screwdriver or other type of tool to pry out staples
Scissors
Utility knife
Some seats have straps, handles, or brackets they may require additional tools for removal.

Most BlackTip Jetsports seat covers are designed to install over your factory cover. The old cover may need to be removed or sections of it removed if it is torn or damaged. If the original is badly damaged or the seat foam is wet you should remove it completely and let the foam dry before installing the new cover.

If the foam is damaged you will need to repair it before installing the new cover or the damage will show through. Small cracks can usually be repaired with duct tape to hide the damage. Larger repairs can be made by replacing the damaged foam and then sanding the new foam to match the shape of the old foam. If your seat has extensive damage we recommend taking it and your new cover to a local upholstery shop.

Installation of the cover is easiest if the vinyl is warm, a nice sunny day, a warm shop, or a hair dryer can accomplish this. Make sure you do not have any sharp corner or protrusions before installing.

Align the cover onto the seat so that it is centered over the main section of the seat. Put a staple at each corner or curve including the front of the seat (these staples may need to be removed later as you stretch the material into place). Once you have the material aligned you can continue stretching and fitting the cover around the seat. As you staple and stretch it may be necessary to trim away excess material. You will want to use many staples around the perimeter of the seat use the original as your guide. After the cover is completely stapled in place you should trim away any excess material.

On some models with a strap you can reinstall the strap at this time if you prefer.